Performance Structure Of Sludge Dewatering Machine

The sludge dewatering machine runs smoothly and without any impact, vibration and abnormal noise.

The machine is made of SUS304 stainless steel and welded with TIG reinforcement. The weld is smooth and smooth without any welding defects. The structure of sludge dewatering machine is firm, chemical corrosion resistance is strong, and the surface of the structure is coated with a top coat, which adds beauty and protective effect.

Sludge dewatering machine has functions of limiting and adjusting mud thickness.

A motor with a power of 0.25KW (1 set at a rotating speed of 35r.p.m.) was used to drive a three-blade helical blade Cross-Rotating stirring in the conditioning stirring tank to make the agglutination react completely with the thickened sludge.

The speed of the machine should be regulated smoothly, and the indication of its system should be consistent with the actual speed of the machine.

The filter cloth is driven by upper and lower filter cloth synchronously. The walking speed is 1-7 m/min. The filter cloth is made of Swedish polyester fiber filter cloth. The service life of the filter cloth is more than 8000 hours.

Sludge dewatering machine is driven by motor, the output speed should be adjustable, all moving parts should be running smoothly, noise < 65dB (A), bearing using Japanese brand factory products.

The cleaning device consists of a spray pipe and 52 copper alloy spray nozzles. The spray range should cover the width of the filter cloth, and each nozzle should be replaced.

The cleaning device has good sealing property, easy to maintain and clean, no splashing water and wet mud cake.

The structure and performance of the cleaning water pump can meet the needs of cleaning filter cloth.

Sludge dewatering machine has perfect functions of automatic control and protection. Once the sludge quantity is insufficient, the coagulant is lacking, the filter belt tracking fails, the washing water pressure is too low, the compressed air pressure is too low, and the external signal command and other abnormal conditions are shutdown and alarm.

All rack steel parts are made of stainless steel SUS304.