How to name the machine and what is the premise of its operation?

There are many kinds of naming forms of screw stacking machine, which are usually brand naming, manufacturer naming and early naming. These three forms represent the basic naming methods of screw stacking machine; The premise for the operation of the screw stacking machine is that the sludge must be flocculated first, and the floc alum is full and solid, so as to achieve better effect. Next, I will introduce it in detail.

1、 How to name the model of screw folding machine

1. Brand name: abbreviation of brand name + product name + model, such as TNW screw stacking machine 301, which is generally abbreviated on the premise of only limiting screw stacking machine products

2. Early nomenclature: when the folding screw machine was introduced in the early stage, the industry adopted the common nomenclature, such as mds201 and mds301. MDS is the abbreviation of multi diskscrew press, which is the English name of screw stacking machine.

3. Various manufacturers: with the continuous branding of various manufacturers, the naming method pays more attention to brand promotion. The letters in the front may change, but the models in the back, such as 201 and 301, will not change. This represents the basic model of the screw folding machine.

2、 Operation premise of screw stacking machine

1. The image of the screw folding machine is mostly recognized by the majority of environmental protection users for its high degree of automation, convenience, water and electricity saving, simple and easy maintenance, etc., so many people have the illusion that the screw folding machine should be able to enter the sewage and clear water, and can operate on its own without any operation, and the effect will be very good.

2. Of course, this is only a small number of customers' misconception, so when some on-site operation is not optimistic, or in fact does not meet the processing conditions of the screw stacking machine, resulting in a sense of contrast when it is unable to meet the needs of customers, so that the reversal of customer perception may feel that it is a problem of equipment quality, or that the screw stacking machine does not live up to its name, and so on.

3. The screw stacking machine is used in the field of sludge dewatering in sewage treatment. Similar to other filter pressing equipment, it is dewatering with physical properties, which requires a certain premise. Therefore, the sludge must be flocculated first, and the floc alum is relatively full and solid, so the sludge effect is relatively good,

4. Secondly, if the flocculated sewage is very clear, the filtrate filtered out by the screw stacking machine will also be relatively clear. Of course, there will inevitably be some impurities, which is inevitable. In addition, the site conditions are diversified, so the treatment methods of sludge with different properties and different treatment processes will be different, which is not the same. It also needs constant adjustment.

The above is about "how to name the screw stacking machine, what is the premise of its operation", I hope it can help you.