How to maintain the spiral sludge dehydrator and what are its advantages?

During the maintenance process, the relevant maintenance record sheet shall be determined, and the bearings shall be lubricated frequently. It has compact design, small floor area and low operation cost. The following describes in detail the "maintenance and advantages of the spiral sludge dehydrator".

1、 Maintenance of spiral sludge dehydrator

1. During the maintenance process of the screw stack sludge dehydrator, relevant maintenance record sheets shall be determined to form good use habits, especially the contents of regular inspection and relevant treatment results, and various maintenance and detection matters and relevant contents shall be recorded.

2. The bearing of the screw stack sludge dehydrator shall be lubricated frequently during use. According to the service cycle and operation time, it is determined to use the oil gun to inject butter to lubricate the bearing, so as to ensure the service life of the equipment bearing in the sewage treatment process.

3. The lubricating oil of the air compressor must be checked regularly during the daily maintenance of the screw stack sludge dehydrator. The lubricating oil should be added and replaced accordingly. After the quality of the oil changes, it should be replaced in time. At the same time, the and fire relief valve of the air barrel should be opened frequently to remove relevant waste water.

4. The screw stack sludge dehydrator generally uses 32# circulating oil during use. The three-point combination should be checked regularly to determine the internal moisture of the equipment, remove relevant lubricating oil regularly, and supplement it in time to ensure the operation of equipment parts during operation and avoid wear of parts during operation.

5. The spiral sludge dehydrator shall be placed on the machine as far as possible to avoid steam, so as not to affect the service life of the machine. At the same time, the machine shall not be placed outdoors.

2、 Advantages of spiral sludge dehydrator

1. Compact design and small floor area

The stacked screw sludge dehydrator covers a very small area and is suitable for various installation environments. It can connect lines according to the drawings, which is simple and easy to use.

2. Low operation cost, water saving and power saving

It can realize self-cleaning and save a lot of cleaning water. The power consumption is very small. In the case of the same processing quantity, the power consumption is only 5% of that of the centrifuge.

3. Simple operation and long service life

Good stability, few daily maintenance items and simple maintenance operation.

4. Wide application range and strong applicability

It can be widely used in municipal sewage, chemical industry, petroleum, tap water, printing and dyeing and paper industry.

The above is the introduction of "maintenance and advantages of stacked screw sludge dehydrator". Please feel free to contact us if you have any questions.