What are the characteristics and applications of industrial sludge dryer?

The industrial sludge dryer has high dehumidification efficiency, no dry exhaust emission and safer operation at low temperature; It can be used in many industries such as municipal sludge and industrial sludge. The characteristics and application of industrial sludge dryer are introduced in detail.

1、 Characteristics of industrial sludge dryer1. The moisture content of the discharged dry sludge can be less than 30%, which has great drying efficiency. The moisture content of the dried sludge can be controlled from 30% to 50%, and the maximum sludge reduction can reach more than 80%.

2. High dehumidification efficiency; By adopting multi-stage energy-saving drying process, the dehydration and dehumidification capacity is significantly improved, and the energy saving is more than 50% compared with the traditional drying method.

3. No dry tail gas emission, no tail gas purification device. The whole set of drying device is fully closed structure design, odor does not overflow, no need to install tail gas treatment system, low COD content of discharged condensate, no need for complex process.

4. Low temperature operation is safer and no dust is produced; When working in a fully enclosed low temperature of 50-75 degrees, the sludge dries into granules, and the granules do not stir. There is basically no dust generation, dust and explosion hazards.

5. Thermal efficiency is high. Adopt the latest multi-level energy-saving technology to save operation cost.

6. Modular design, fast field installation. The whole equipment is made of corrosion-resistant high-quality stainless steel, with a service life of more than 15 years and a small area.

2、 Application of industrial sludge dryer

1. Municipal sludge and industrial sludge.

2. Printing and dyeing, electroplating, papermaking, leather, chemical industry, pharmaceutical industry, water content 75% dry to 10%, weight reduction of more than 75%, suitable for plate and frame filter press sludge.

3. The moisture content of wet material is 83% - 40%.

4. The moisture content of dry material is 20% - 40%.

The above is the introduction of "characteristics and application of industrial sludge dryer". Please feel free to contact us if you have any questions.