Fully automatic CNC thread rolling machine detailed introduction

     The fully automatic CNC thread rolling machine is mainly used for cold rolling forming. The cold rolling process is an advanced chip-free processing technology that uses rolling tools for extrusion molding. Rolling metal fiber is continuous, and the radial pressure generated by rolling can effectively improve the surface finish, hardness and strength of the workpiece, and increase the work efficiency several times or even dozens of times compared with chip processing, which saves more materials and is easier to achieve. Automated processing.

　　Automatic CNC thread rolling machine

　　Automatic CNC thread rolling machine is mainly composed of main body, side body, power distribution box, exchange gear box, rolling system, hydraulic system, electric system, cooling system, etc.

     (1) The main body is a box-shaped casting, on which the AB seat, sliding seat, and electrical control panel are installed on the plane, and there is an oil reservoir below to store the coolant, and the electrical switchboard is installed on the left side of the cooling pool; a hydraulic station is additionally installed .

　　(2) The side machine body is a frame-shaped casting, which is integrated with the main body by a screw structure, and the power distribution box, the main motor workpiece bracket, etc. are installed on it.

      (3) Power distribution box: It is mainly installed with a gear and shaft. The function of this box is that the main motor transmits power to the box, and the power is transmitted to the two wheel rods at a uniform speed through the reducer. The middle of the box body is a hollow gear shaft. To facilitate the passage of long workpieces.

　　 (4) Transmission gearbox: The processing capacity is large, and the transmission part adopts a 400-type reducer. The transmission is lengthened, the twisting force is increased, and the gear modulus and output force are larger than those of the general gearbox.

　　 (5) Rolling system: It consists of a fixed seat, a sliding seat and a wheel bar mechanism.

　　A. There are two fixed seats AB. Seat A is equipped with a wheel rod seat to install the roller; Seat B is equipped with a spring drive mechanism and a sliding seat, and the backward position adjustment screw and hydraulic pressure gauge switch.

　　B. The front of the sliding seat is equipped with a wheel rod mechanism, and the back is equipped with two oil cylinders. The bottom surface moves radially along the guide rail and retreats by the spring mechanism.

　　C. The wheel bar mechanism mainly consists of a wheel bar seat and a wheel bar support seat. The wheel bar seat can be adjusted in the range of &plusmn.

     (6) Cooling system: The liquid is mainly sent to the spray head by the electric pump through the pipeline. The spray head can adjust the flow rate of the liquid. It is strictly forbidden to fill the coolant too much, based on the 4 cm above the suction head; too much, easy to enter For the motor, the electric pump is burnt down, and the coolant can be 20# mechanical oil, plus proper amount of diesel oil.

　　 CNC thread rolling machine product introduction

      The fully automatic CNC thread rolling machine can perform rolling, straightening, rolling, reducing diameter and various kinds of threads on the workpiece in the cold state within its rolling range. Forming and rolling, the machine has a safe and reliable electro-hydraulic execution and control mechanism. The rolling work cycle can be selected between manual and automatic (users can prepare their own rollers according to their needs).